Paint
-
Romabio Romabio Velatura Mineral Wash - 1 LITER
Custom Tinting Available for Romabio Velatura Mineral Wash at NC PAINTS. Velatura Mineralwash is an authentic mineral-based paint to create mottling or subtle movement effects for a limewash look on Interior drywall in two easy steps with no additional primer. An artistic applicator can paint soft tonal color variations in a brush-applied crosshatch technique for the 1st coat and can use varied techniques with a brush, cloth, or rag for the 2nd coat. Recommended in bedrooms, living rooms, and other common areas (Not recommended for high-traffic) Toxin-free, Zero-VOC, and environmentally friendly Brush-applied in two easy steps with no primer Multiple applicators can work the same wall and achieve similar effects Surface Types Interior pre-painted or unpainted Gypsum Board (Drywall) Coverage 1 Coat 1L/1QT 2.5L/0.67GAL Square Feet 100-140 250-350 Application Requirements PREP Make sure the surface is clean and ready to be painted. 1st COAT: Apply undiluted or add up to 5% water in a crosshatch technique to fully cover the wall. Let dry to touch before next coat. 2nd COAT: Must dilute 50%-80% with water and then paint in crosshatch technique and use cloth technique if needed. TOOLS Apply with a brush for 1st Coat and brush and/or cloth for 2nd coat. DRY TIME 4-6 Hours TOUCH UPS Very flat finish. Recommended Dilution 2nd Coat ONLY 1L/1QT 2.5L/0.67GAL 50% 500ml 1.25L 80% 800ml 2L
$59.99
-
Romabio Romabio Velatura Mineral Wash - 15 LITER
Custom Tinting Available for Romabio Velatura Mineral Wash at NC PAINTS. Velatura Mineralwash is an authentic mineral-based paint to create mottling or subtle movement effects for a limewash look on Interior drywall in two easy steps with no additional primer. An artistic applicator can paint soft tonal color variations in a brush-applied crosshatch technique for the 1st coat and can use varied techniques with a brush, cloth, or rag for the 2nd coat. Recommended in bedrooms, living rooms, and other common areas (Not recommended for high-traffic) Toxin-free, Zero-VOC, and environmentally friendly Brush-applied in two easy steps with no primer Multiple applicators can work the same wall and achieve similar effects Surface Types Interior pre-painted or unpainted Gypsum Board (Drywall) Coverage 1 Coat 1L/1QT 2.5L/0.67GAL Square Feet 100-140 250-350 Application Requirements PREP Make sure the surface is clean and ready to be painted. 1st COAT: Apply undiluted or add up to 5% water in a crosshatch technique to fully cover the wall. Let dry to touch before next coat. 2nd COAT: Must dilute 50%-80% with water and then paint in crosshatch technique and use cloth technique if needed. TOOLS Apply with a brush for 1st Coat and brush and/or cloth for 2nd coat. DRY TIME 4-6 Hours TOUCH UPS Very flat finish. Recommended Dilution 2nd Coat ONLY 1L/1QT 2.5L/0.67GAL 50% 500ml 1.25L 80% 800ml 2L
$429.99
-
Romabio Romabio Velatura Mineral Wash - 2.5 LITER
Custom Tinting Available for Romabio Velatura Mineral Wash at NC PAINTS. Velatura Mineralwash is an authentic mineral-based paint to create mottling or subtle movement effects for a limewash look on Interior drywall in two easy steps with no additional primer. An artistic applicator can paint soft tonal color variations in a brush-applied crosshatch technique for the 1st coat and can use varied techniques with a brush, cloth, or rag for the 2nd coat. Recommended in bedrooms, living rooms, and other common areas (Not recommended for high-traffic) Toxin-free, Zero-VOC, and environmentally friendly Brush-applied in two easy steps with no primer Multiple applicators can work the same wall and achieve similar effects Surface Types Interior pre-painted or unpainted Gypsum Board (Drywall) Coverage 1 Coat 1L/1QT 2.5L/0.67GAL Square Feet 100-140 250-350 Application Requirements PREP Make sure the surface is clean and ready to be painted. 1st COAT: Apply undiluted or add up to 5% water in a crosshatch technique to fully cover the wall. Let dry to touch before next coat. 2nd COAT: Must dilute 50%-80% with water and then paint in crosshatch technique and use cloth technique if needed. TOOLS Apply with a brush for 1st Coat and brush and/or cloth for 2nd coat. DRY TIME 4-6 Hours TOUCH UPS Very flat finish. Recommended Dilution 2nd Coat ONLY 1L/1QT 2.5L/0.67GAL 50% 500ml 1.25L 80% 800ml 2L
$99.99
-
Romabio Romabio Venetian Glaze - 1 LITER
Custom Tinting Available for Venetian Glaze at NC PAINTS. A Designer’s Dream Finish: Multiple Looks, One Authentic Lime Plaster Paint Venetian Glaze is an authentic Italian slaked-lime plaster paint designed to deliver multiple distinctive finishes all in one versatile product. On smooth interior drywall it can be troweled to create rich movement and classic plaster-like finishes. The texture can be either subtle or dramatic depending on how much the Venetian Glaze is diluted. When heavily diluted and applied with a brush, it produces a veiling effect that subtly shift the color of interior or exterior brick, stone, or other absorbent masonry surfaces while preserving the natural texture of the surface. Crafted by Nature. Designed for Endless Possibilities Romabio Venetian Glaze is not a synthetic glaze or acrylic paint—it’s an authentic slaked-lime plaster paint crafted in Italy. Its natural slaked-lime base makes it breathable, eco-friendly, and extremely durable, allowing it to create either subtle, plaster-like movement on smooth surfaces or nuanced tonal variation on masonry. The result is a very flat, mineral finish that feels authentic and stands the test of time. Creates plaster-like depth and movement when troweled on interior drywall Ideal for color-shifting stone or brick while preserving natural texture Zero VOC, low odor, and environmentally friendly Surface Types Interior pre-painted or unpainted Drywall (MicroGrip Primer);Absorbent Stone or other Masonry (No Primer); Portland or Gypsum Stucco (MicroGrip Primer) Application Requirements INTERIOR DRYWALL First, apply one coat of MicroGrip Primer, let dry overnight, then lightly sand to create uniform surface 1st COAT & 2nd COAT: Apply undiluted or add up to 5% water and use a trowel STONE OR MASONRY Surface must be absorbent for a semi-transparent effect; no primer needed APPLY IN 1 COAT: 100% – 300% dilution with a Romabio Masonry Brush See detailed application instructions in the TDS. Coverage 1 Coat for Interior Drywall 1L/1QT 2.5L/0.67GAL Square Feet 40-100 100-250 1 Coat for Absorbent Masonry 1L/1QT 2.5L/0.67GAL Square Feet 160-260 400-650
$59.99
-
Romabio Romabio Venetian Glaze - 15 LITER
Custom Tinting Available for Venetian Glaze at NC PAINTS. A Designer’s Dream Finish: Multiple Looks, One Authentic Lime Plaster Paint Venetian Glaze is an authentic Italian slaked-lime plaster paint designed to deliver multiple distinctive finishes all in one versatile product. On smooth interior drywall it can be troweled to create rich movement and classic plaster-like finishes. The texture can be either subtle or dramatic depending on how much the Venetian Glaze is diluted. When heavily diluted and applied with a brush, it produces a veiling effect that subtly shift the color of interior or exterior brick, stone, or other absorbent masonry surfaces while preserving the natural texture of the surface. Crafted by Nature. Designed for Endless Possibilities Romabio Venetian Glaze is not a synthetic glaze or acrylic paint—it’s an authentic slaked-lime plaster paint crafted in Italy. Its natural slaked-lime base makes it breathable, eco-friendly, and extremely durable, allowing it to create either subtle, plaster-like movement on smooth surfaces or nuanced tonal variation on masonry. The result is a very flat, mineral finish that feels authentic and stands the test of time. Creates plaster-like depth and movement when troweled on interior drywall Ideal for color-shifting stone or brick while preserving natural texture Zero VOC, low odor, and environmentally friendly Surface Types Interior pre-painted or unpainted Drywall (MicroGrip Primer);Absorbent Stone or other Masonry (No Primer); Portland or Gypsum Stucco (MicroGrip Primer) Application Requirements INTERIOR DRYWALL First, apply one coat of MicroGrip Primer, let dry overnight, then lightly sand to create uniform surface 1st COAT & 2nd COAT: Apply undiluted or add up to 5% water and use a trowel STONE OR MASONRY Surface must be absorbent for a semi-transparent effect; no primer needed APPLY IN 1 COAT: 100% – 300% dilution with a Romabio Masonry Brush See detailed application instructions in the TDS. Coverage 1 Coat for Interior Drywall 1L/1QT 2.5L/0.67GAL Square Feet 40-100 100-250 1 Coat for Absorbent Masonry 1L/1QT 2.5L/0.67GAL Square Feet 160-260 400-650
$449.99
-
Romabio Romabio Venetian Glaze - 2.5 LITER
Custom Tinting Available for Romabio Venetian Glaze at NC PAINTS. Venetian Glaze Paint – A Versatile Slaked Lime Plaster Finish A Designer’s Dream Finish: Multiple Looks, One Authentic Lime Plaster Paint Venetian Glaze is an authentic Italian slaked-lime plaster paint designed to deliver multiple distinctive finishes all in one versatile product. On smooth interior drywall it can be troweled to create rich movement and classic plaster-like finishes. The texture can be either subtle or dramatic depending on how much the Venetian Glaze is diluted. When heavily diluted and applied with a brush, it produces a veiling effect that subtly shift the color of interior or exterior brick, stone, or other absorbent masonry surfaces while preserving the natural texture of the surface. Crafted by Nature. Designed for Endless Possibilities Romabio Venetian Glaze is not a synthetic glaze or acrylic paint—it’s an authentic slaked-lime plaster paint crafted in Italy. Its natural slaked-lime base makes it breathable, eco-friendly, and extremely durable, allowing it to create either subtle, plaster-like movement on smooth surfaces or nuanced tonal variation on masonry. The result is a very flat, mineral finish that feels authentic and stands the test of time. Creates plaster-like depth and movement when troweled on interior drywall Ideal for color-shifting stone or brick while preserving natural texture Zero VOC, low odor, and environmentally friendly Surface Types Interior pre-painted or unpainted Drywall (MicroGrip Primer);Absorbent Stone or other Masonry (No Primer); Portland or Gypsum Stucco (MicroGrip Primer) Coverage 1 Coat for Interior Drywall 1L/1QT 2.5L/0.67GAL Square Feet 40-100 100-250 1 Coat for Absorbent Masonry 1L/1QT 2.5L/0.67GAL Square Feet 160-260 400-650 Application Requirements INTERIOR DRYWALL First, apply one coat of MicroGrip Primer, let dry overnight, then lightly sand to create uniform surface 1st COAT & 2nd COAT: Apply undiluted or add up to 5% water and use a trowel STONE OR MASONRY Surface must be absorbent for a semi-transparent effect; no primer needed APPLY IN 1 COAT: 100% – 300% dilution with a Romabio Masonry Brush See detailed application instructions in the TDS. Recommended Dilution STONE OR MASONRY ONLY 1L/1QT 2.5L/0.67GAL 100% 1L 2.5L 300% 3L 7.5L
$99.99
-
FARRELL CALHOUN RUST NOX ACRYLIC DTM SATIN by Farrell Calhoun
Rustnox II paints are modern, high quality, durable, 100% acrylic waterborne coatings formulated with a next generation cross-linking acrylic resin system. These products can be used as corrosion resistant direct-to-metal primers and/or as topcoats for ferrous and nonferrous metal surfaces including galvanized metal and aluminum. These products produce a hard, durable, chemical resistant, and washable surface that are low VOC* and low odor. Rustnox II has a long history of being safe to use around the home and farm on other surfaces as well such as wood, masonry and drywall.
$64.99 - $324.95
-
FARRELL CALHOUN TUFF BOY 100% ACRYLIC DTM SEMI-GLOSS 8000 Farrell Calhoun
Tuff-Boy 8000 is a premium, next generation DTM enamel that has been formulated with a unique 100% Acrylic cross linking resin with built-in rust inhibiting capabilities so that it may be applied to properly prepared, ferrous metal surfaces. Being 100% Acrylic, Tuff-Boy 8000 has excellent adhesion, durability and block resistance. Tuff-Boy 8000 is high hiding, easy to apply, and has good flow and leveling properties. Unlike traditional oil-based enamels, Tuff-Boy 8000 offers excellent color and gloss retention, will not yellow, is low odor and low VOC*. When used with the Tuff-Boy Rust Stop primers, this product provides excellent corrosion protection for ferrous metals. This product meets Green Wise Product Performance Testing requirements. ● ≤ 50 g/l VOC
$54.99
-
FARRELL CALHOUN TUFF BOY 5-56 DTM PRIMER / FINISH FLAT WHITE GAL Farrell Calhoun
5-56 is a premium waterborne 100% Acrylic interior/exterior primer/finish coat that is formulated with both a rust inhibiting resin system and rust inhibiting pigments to block tightly adhering rust on ferrous metal surfaces. This high solids primer is also an excellent product for both interior or exterior aluminum and galvanized metal surfaces. #5-56 is easy to apply and dries to a hard, low sheen finish and provides an excellent foundation for enamels or may be used solely as a finish coat. Due to the low sheen, #5-56 hides most imperfections giving a long lasting, durable, beautiful finish. #5-56 may be topcoated with either latex or oilbase coatings. This product meets Green Wise Product Performance Testing ● ≤ 50 g/l VOC
$49.99
-
FARRELL CALHOUN Tuff-Boy Alkyd Int/Ext Industrial Gloss Enamel GAL Farrell Calhoun
Tuff-Boy Industrial Enamel is a premium, gloss enamel that has been uniquely formulated with an alkyd-urethane resin so that it is easy to apply, has good flow and leveling properties and good gloss and color retention. This weather resistant enamel brushes easily and has outstanding durability. When used with the Tuff-Boy Rust Stop primers, this product provides excellent corrosion protection for ferrous metal surfaces.
$64.99
-
Benjamin Moore Ultra Spec 500 — Interior Satin/Pearl Finish T545
Available Colors: White and 1X, 2X, 3X, 4X bases Sheen (or Gloss): Satin Cleanup: Soap and Water Resin Type: Acrylic Copolymer Recommended Use: Interior MPI Rating: 43140146 VOC Level: 0.0 Excellent hiding Spatter resistant Great touch-up properties Decorative and uniform flat finish Soap-and-water cleanup Zero VOCs Qualifies for LEED credit Washable Quick drying Low odor Easy application Superior flow and leveling MPI approved Engineered with Gennex® Color Technology View the brochure for more information (English) View the brochure for more information (Spanish) SDS S545-1X (English) TDS T545 (English)
$52.99 - $264.95
-
Benjamin Moore Ultra Spec 500 — Interior Semi-Gloss Finish T546
Available Colors: White and 1X, 2X, 3X, 4X bases Sheen (or Gloss): Semi-Gloss Cleanup: Soap and Water Resin Type: Acrylic Copolymer Recommended Use: Interior MPI Rating: 54141147 VOC Level: 0.0 Excellent hiding Spatter resistant Great touch-up properties Decorative and uniform flat finish Soap-and-water cleanup Zero VOCs Qualifies for LEED credit Washable Quick drying Low odor Easy application Superior flow and leveling MPI approved Engineered with Gennex® Color Technology View the brochure for more information (English) View the brochure for more information (Spanish) SDS T546-01 (English) TDS T546 (English)
$54.99 - $274.95
-
Benjamin Moore Ultra Spec® 500 — Interior Eggshell Finish T538
Available Colors: White and 1X, 2X, 3X, 4X bases Sheen (or Gloss): Eggshell Cleanup: Soap and Water Resin Type: Acrylic Copolymer Recommended Use: Interior MPI Rating: 52, 139, 145 VOC Level: 0.0 Excellent hiding Spatter resistant Great touch-up properties Decorative and uniform gloss finish Soap-and-water cleanup Washable Quick drying Low odor Easy application MPI & MPI HP approved Engineered with Gennex® Color Technology View the brochure for more information (English) View the brochure for more information (Spanish) SDS T538-1X (English) TDS T538 (English)
$49.99 - $249.95
-
Benjamin Moore Ultra Spec® 500 — Interior Flat Finish T535
Available Colors: White and 1X, 2X, 3X, 4X bases Sheen (or Gloss): Flat Cleanup: Soap and Water Resin Type: Acrylic Copolymer Recommended Use: Interior MPI Rating: 53, 143 VOC Level: 0.0 Excellent hiding Spatter resistant Great touch-up properties Decorative and uniform flat finish Soap-and-water cleanup Zero VOCs Qualifies for LEED credit Washable Quick drying Low odor Easy application Superior flow and leveling MPI approved Engineered with Gennex® Color Technology View the brochure for more information (English) View the brochure for more information (Spanish) SDS T535-01 (English) TDS T535 (English)
$49.99 - $249.95
-
Benjamin Moore Ultra Spec® SCUFF-X® - Eggshell N485
A high-performance, one-component latex paint specifically engineered to deliver outstanding performance and protection for the toughest high-traffic areas in busy commercial spaces. This breakthrough product offers superior durability and scuff-resistance than traditional high-performance two-component coatings, without the pre-mixing, short pot-life and application difficulties related to similar products. It will retain its high-quality appearance longer with minimal maintenance and repainting required. The beautiful eggshell finish is perfect hallways, fitting rooms and waiting areas. Innovative and patented scuff-resistant formula protects walls from the toughest scuff marks Low odor Low VOC High-performance in a latex formula Quick drying Great touch-up Spatter resistant Easy application Withstands repeated washing Qualifies for LEED® v4 credit CHPS certified Contains anti-microbial additives that inhibit the growth of mold and mildew on the surface of the paint film Engineered with Gennex® Color Technology For helpful information, check out our tools and resources page Learn more about the award-winning Scuff-X Recommended for:For commercial applications Ideal for high-traffic areas in commercial spaces such as school hallways, hospital waiting areas, hotels lobbies, gym locker rooms and bathrooms, retail fitting rooms, cafeterias, bathrooms and stairwells. SDS N485-01 (English) TDS N485 (English)
$84.99 - $424.95
-
Benjamin Moore Ultra Spec® SCUFF-X® - Matte N484
A high-performance, one-component latex paint specifically engineered to deliver outstanding performance and protection for the toughest high-traffic areas in busy commercial spaces. This breakthrough product offers superior durability and scuff-resistance than traditional high-performance two-component coatings, without the pre-mixing, short pot-life and application difficulties related to similar products. It will retain its high-quality appearance longer with minimal maintenance and repainting required. The beautiful eggshell finish is perfect hallways, fitting rooms and waiting areas. Innovative and patented scuff-resistant formula protects walls from the toughest scuff marks Low odor Low VOC High-performance in a latex formula Quick drying Great touch-up Spatter resistant Easy application Withstands repeated washing Qualifies for LEED® v4 credit CHPS certified Contains anti-microbial additives that inhibit the growth of mold and mildew on the surface of the paint film Engineered with Gennex® Color Technology For helpful information, check out our tools and resources page Learn more about the award-winning Scuff-X Recommended for:For commercial applications Ideal for high-traffic areas in commercial spaces such as school hallways, hospital waiting areas, hotels lobbies, gym locker rooms and bathrooms, retail fitting rooms, cafeterias, bathrooms and stairwel SDS N484-01 (English) TDS N484 (English)
$84.99 - $424.95
-
Benjamin Moore Ultra Spec® SCUFF-X® - Semi-Gloss N487
Only Scuff-X semi-gloss offers our patented scuff-resistance and chip-resistant technologies (Chip-Tech®) to deliver a unique blend of toughness and flexibility, rather than just relying on a hard surface, which can be more brittle and subject to chipping. It withstands direct and glancing blows hits that doors, trim, baseboard, and columns receive on a daily basis. Proprietary and patented CHIP-TECH® Technology Innovative and patented scuff-resistant formula Low odor Low VOC High-performance in a latex formula Quick drying Great touch-up Spatter resistant Easy application Withstands repeated washing Qualifies for LEED® v4 credit CHPS certified Contains anti-microbial additives that inhibit the growth of mold and mildew on the surface of the paint film Engineered with Gennex® Color Technology For helpful information, check out our tools and resources page Learn more about the award-winning Scuff-X Recommended for:Ideal for use on elevator doors, door jambs, trim and base boards, columns, window trim, hallways and stairwells, and other high-traffic commercial areas, including hospitality venues, educational institutions, healthcare facilities, corporate establishments and retail environments. SDS N487-01 (English) TDS N487 (English)
$84.99 - $424.95
-
Benjamin Moore Waterborne Ceiling Paint N508
Our best ceiling paint from Benjamin Moore. Available at NC Paints! Offering superior hide for a flawless finish. The flattest finish offered by Benjamin Moore for concealing common surface imperfections. Easy application with fantastic results. Available Colors: All Colors, Ready Mixed White Sheen (or Gloss): Ultra Flat Cleanup: Soap and Water Resin Type: Acrylic Latex Recommended Use: Interior MPI Rating: VOC Level: 0.0 Superior hide for a flawless finish Flattest finish offered by Benjamin Moore Conceals common surface imperfections Easy application with fantastic results Ample open time ensure minimal lapping Formulated for minimal spatter Zero VOC Engineered with Gennex® Color Technology Watch our how-to video for tips on applying Waterborne Ceiling Paint SDS N508-09 (English) TDS N508 (English)
$24.99 - $219.95
-
Benjamin Moore WOODLUXE Oil Semi-Solid 593
Penetrating oils that enhance wood grain, creating a classic oil finish. Semi-Solid opacity allows the texture and some of the grain pattern of wood to show through One-coat application that minimizes lap marks Uses proprietary alkyd/linseed oil resin that provides strong penetration and durability Provides a mildew and UV-resistant coating Reduced cracking and peeling Advanced all-weather protection Availability in a wide range of colors
$26.99 - $324.95
-
Benjamin Moore WOODLUXE Oil Semi-Transparent 592
Penetrating oils that enhance wood grain, creating a classic oil finish. Semi-Transparent opacity allows most of the grain pattern and texture of the wood to show through One-coat application that minimizes lap marks Uses proprietary alkyd/linseed oil resin that provides strong penetration and durability Provides a mildew and UV-resistant coating Reduced cracking and peeling Advanced all-weather protection Availability in a wide range of colors
$26.99 - $324.95
You have seen 236 out of 236 products